Setup & care
From delivery to first cut
What to do when your machine arrives, how to start it the first time, and the care that matters most in its first season. Your operator's manual always comes first.

Setup by machine type
- Time
- 1–2 h
- People
- 2
- Skill
- Basic tools
Receiving and unpacking
- 01
Inspect the crate with the driver before you sign. Note any damage on the delivery receipt.
- 02
Move the crate to a flat, hard surface with room to walk all the way around it.
- 03
Cut the banding and remove the crate walls and fasteners. Keep the packaging until you've checked everything.
- 04
Compare the loose parts against the packing list in your operator's manual.
First start
- 01
Read the safety section of the operator's manual and find the parking brake, blade switch and lap-bar controls.
- 02
Check the engine oil level. Some machines ship without oil, so follow the manual before you add any.
- 03
Check tire pressure against the values on the tires or in the manual.
- 04
Connect and charge the battery as the manual directs, then add fresh fuel.
- 05
Practice lap-bar steering at low throttle on flat, open ground before mowing.
First-season maintenance
- 01
Change the oil and filter at the break-in interval in your manual.
- 02
Clean grass build-up from under the deck after each use.
- 03
Check blade sharpness and deck level. Dull blades tear grass instead of cutting it.
- 04
Check belts, the air filter and tire pressure every few weeks.
- Time
- 1–2 h
- People
- 2
- Skill
- Basic tools
Receiving and unpacking
- 01
Inspect the crate with the driver before you sign. Note any damage on the delivery receipt.
- 02
Move the crate to a flat, hard surface near where the tractor will be stored.
- 03
Remove the banding, crate walls and fasteners. Keep the packaging until you've checked everything.
- 04
Fit any parts shipped loose (seat, steering wheel or similar) as shown in the operator's manual.
First start
- 01
Read the safety section of the operator's manual and find the brake, blade engagement and cutting-height controls.
- 02
Check the engine oil level. Some machines ship without oil, so follow the manual before you add any.
- 03
Check tire pressure on all four tires.
- 04
Connect and charge the battery as the manual directs, then add fresh fuel.
- 05
Drive a few laps with the blades off to get used to the steering and brake.
First-season maintenance
- 01
Change the oil and filter at the break-in interval in your manual.
- 02
Clean the deck underside and check blade sharpness.
- 03
Level the deck so the cut is even side to side.
- 04
Check belts, the air filter, battery terminals and tire pressure.
- Time
- 30–45 min
- People
- 1
- Skill
- Few or no tools
Receiving and unpacking
- 01
Inspect the box before you sign. Note any damage on the delivery receipt.
- 02
Unbox on a flat surface and lift the mower out by the frame, not the handle.
- 03
Unfold and secure the handle as shown in the operator's manual, keeping control cables untwisted.
- 04
Check the contents against the packing list in the manual.
First start
- 01
Read the safety section of the operator's manual.
- 02
Check the engine oil level. Some mowers ship without oil, so follow the manual before you add any.
- 03
Add fresh fuel (or charge the battery on battery models).
- 04
Fit the grass bag, mulch plug or side-discharge chute for how you want to mow.
- 05
Start on a clear, flat patch of lawn.
First-season maintenance
- 01
Change the oil at the interval in your manual.
- 02
Clean grass from under the deck, with the spark plug wire disconnected or the battery removed.
- 03
Sharpen or replace the blade when the cut looks ragged.
- 04
Clean or replace the air filter.
Site-readiness checklist
Tick these off before delivery day. Your progress is saved on this device.
Ready for delivery
Need the manual?
Manuals and product registration live on each manufacturer's site. If you can't find yours, ask us and we'll help.